Raspberry pi live weather display install#
Raspberry pi live weather display driver#
Raspberry pi live weather display windows#

Our Weather station is a HP1000 clone from Fine Offset. The camera will display a new image every 60 seconds between 06 due to the limited amount of data available on the clubвЂ™s mobile internet connection.Д¬licking on this link will open the latest image on a new page, which can be refreshed at will. This is an old view from the Clubhouse, however it doesnвЂ™t auto refresh. Any data before 1245 on is test/fake, anything after this time is live. The data is currently live but being tested and will be uploaded every 60 seconds from our weather station.

Unfortunately, I couldn't use vlc in the same manner, as nc -l -p 5001 | vlc - just opens vlc window without any video.We are currently developing a new weather station view for this website which you can test at or or My raspberry operates over wifi, so at first I get a fair delay, which is in a matter of half a minute reduced to those 0.2-0.3 seconds delay. Binary stream from raspvid is feeded into mpc and shown. Thus, i deem, nothing gets repacked or restreamed, remuxed or what so ever.

Raspberry pi live weather display windows#

On windows machine: nc -l -p 5001 | mpc-hc64.

Raspberry pi live weather display install#

get a new version of mpc-hc, which may read from stdin: install and add its path to path as well (mine is 64-bit, but 32-bit will hopefully do as well).

get a windows version of netcat:, unzip it and add to path.

I got a pretty quick solution eventually: There were many linux solutions, not I couldn't replicate them on windows until now. I was having trouble getting the video stream on windows 7. The port is set under stream_port in /etc/motion/nf. Use systemctl start/stop/restart motion for the corresponding action.Дefault streaming port is 8081. To make the service autostart on boot: systemctl enable motion Next, in /etc/default/motion set: start_motion_daemon=yes Stream_localhost off # when 'on' others hosts will NOT see the server To use it in IP webcam mode the following settings should be set in /etc/motion/nf: daemon on Motion includes a systemd service which makes it easy to autostart at boot, stop or restart.

Raspberry pi live weather display driver#

If the input_uvc.so driver is not working for you or you don't want to configure the raspberry pi camera as a UVC device, then you can also try the input_raspi.so driver.Д¬ustom config options supported by each driver: The start.sh script contains some usage examples with extra options. If not specified, then port 8080 will be used by default. # set resolution to 1920x1080 and 180В° rotation mjpg_streamer -i './input_uvc.so' -o './output_http.so' Mjpeg_streamer requires compilation but the instructions on the github are straightforward.ДЄfter compilation it can be run by launching start.sh from the project dir, or by running directly (in the project dir): # stream with default options (port=8080) (works for USB cameras too) Hope you find what you're looking for.Д«oth mjpeg_streamer and motion seem to have better latency than cvlc. Watch THIS wiki about Raspberry Pi Camera Module. If you don't care about FPS (frames per second) and don't want any delay you could use MJPEG.

Press Media -> Open Networkstream and paste the following in the field: rtsp://.:8554/

To watch the videostream, open VLC on a computer on the same network as the raspberry pi you are using for streaming. To make this work I had to make another script runned by cron (OBS! VLC can't be run as sudo so make sure you're in the right cron). If you want to start the stream automatically you have to add the script to crontab. Make the script runable sudo chmod +x myscript.sh Have raspbian installed and updated and make sure your camera is enabled (you enable this by running sudo raspi-config and choose Enable Camera)Д¬reate a script to start the stream with the following content, or run the command (you can't do anything else if you just run the command). One downside of this is that there are about 5 seconds delay and I haven't found a solution to this. At my work we are using VLC to stream video captured by Raspberry Pi Camera from our server-rooms to the office. There are several options you can choose between.